how to install berber carpet

how to install berber carpet::Carpet tiles are easy to remove and replace.
Carpet tiles that are stained beyond repair can be lifted out and replaced in a matter of minutes.
An average sized room can be fully carpeted in less than a day by one or two people.
Calculate how many tiles are required measure the length and width of your room.
Multiply these two measurements to determine the square footage of your room.
If your room is irregularly shaped, try to break it into smaller rectangles and add the areas of the rectangles together.
Vacuum or sweep the floor, removing all dirt, dust and any stains or adhesives.
Using a measuring tape, find and mark the center of each wall.
Fit the tiles tightly together and make sure that one side lines up with the chalk lines.
Stop your line at the last full carpet tile.
Some carpet tiles have arrows on the back that indicate which direction the tiles should lay.
Different manufacturers have different methods for fixing carpet tiles.
If your carpet tiles come without adhesives, apply twosided tape to the floor in an 8 to 12 inch grid pattern over the empty rectangles created by your baseline.
Lay carpet tiles from the center toward the room corners using the adhesive system appropriate for your carpet tiles.
To measure a tile for cutting, lay the tile so that the backing faces up.
Place the carpet tile on a piece of scrap wood or heavy cardboard with the backing side up.
Continue to measure and cut carpet tile around the edge of the room.
how to install berber carpet::Berber carpet can be installed on stairs,
but it is important that it be installed correctly so that it will last
for as long as possible how to install berber carpet

Koivu Mays Glebitzsch blog

понедельник, 3 октября 2011 г.